Please Wait...
progress bar
Last reviewed: Thu, 15 Sep 2011

Chemical analysis

A typical average chemical (naturally occurring) analysis of Christchurch water

pH

7.8

pH after aeration

8.2

Acidity to pH 8.3 (as CO3)

1 g/m³

Total alkalinity to pH 4.5 as HCO3

52 g/m³

Turbidity (NTU)

Less than 1

Nitrate Nitrogen

1 g/m³

Sulphate

5.0 g/m³

Chloride

5.0 g/m³

Calcium

12.0 g/m³

Fluoride

Less than 0.1 g/m³

Magnesium

1.5 g/m³

Potassium

1 g/m³

Sodium

6.1 g/m³

Reactive silica (as SO2)

16.0 g/m³

Total hardness (as CaCO3)

45 g/m³

Conductivity at 20?C (mS/m)

10

Note: Grams per cubic meter (g/m³) is equivalent to milligrams per litre (mg/l).

There are a total of 38 routine chemical tests carried out on Christchurch water. 22 of these tests establish the presence of the specific chemical tested for, in order to be below measurable limits.

 

Authorising Unit: Asset and Network Planning

Last reviewed: Thursday, September 15, 2011

Next review: Thursday, March 15, 2012

Keywords: chemical, chemicals, christchurch, water, water quality, water quality drinking water standards water gradi, water supply, water treatment open day water treatment plant was